ReLED is a Retrofit Kit for the conversion to LED of already installed fixtures.
ReLED is the ideal solution for street light fixtures or urban street lamps, but especially for historical lanterns with discharge technology whose aesthetics are often bound as Historical and Cultural Heritage.
The long experience in restoration and the vocation to manage custom projects place us among the market leaders in the analysis and study of the most suitable responses to the concrete needs of LED retrofit and upgrade of existing systems.
ALL THE ADVANTAGES OF ReLED
Safeguarding the historical heritage
The ReLED Retrofit Kit can be installed on any fixture, preserving the aesthetics of lighting fixtures of historical value and adapting them to the most modern LED technology.
Ease of installation
ReLED is designed to simplify assembly operations and reduce installation time.
The installation of ReLED brings an effective energy saving of more than 50% in terms of operating and maintenance costs of the system.
The optical system of ReLED is designed and developed to ensure high visual comfort and minimise the point effect typical of LED sources.
Long life of LED sources
All GMR ENLIGHTS products make use of LED sources able to guarantee the maximum service life of the fixture, with a typical luminous output decay of L90B10 100,000h (LM80 – TM21 protocol).
Quality of Finishes
The ReLED plate is subject to a cycle of surface treatments to increase corrosion resistance.
The high quality of the treatment is confirmed by salt spray tests (Salt Spray 8000h ISO 9227).
ReLED uses the GLASS-FREE technology, a refractive optical system composed of single-chip LEDs, PMMA IP66 and IK09 lenses with high impact resistance and under warranty for 30 years against UV and yellowing due to ageing (without glass).
Thanks to the range of available optics, ReLED can be adapted to any installation requirement.
The luminous output is distributed only where necessary to maximise performance.
STEP BY STEP CUSTOMISATION
ReLED is a flexible system: the LED engine, with driver and dissipation mechanism, is implemented with a custom plate in a tailor-made solution, developed through the study of a sample of the fixture or through adequate information to uniquely identify it.
A sample of the lighting fixture to be regenerated and/or a request form are sent to the company, with all the essential information for the elaboration of a proposal.
After a quick sample study phase, ReLED is adapted to the specific needs.
This is followed by a prototype, test and verification phase prior to production.
The product is supplied with a customised manual, ready for quick and easy installation.
GMR ReLED is the retrofit kit specially designed for GMR ENLIGHTS lighting fixtures.
The kit is already implemented in an easily installable system available for delivery in a short time.
THE QUALITY OF OUR RETROFIT KITS IS CERTIFIED
Ta -40° +55°C
Salt Spray (plate) 8000h ISO 9227
Surge Protection up to 12kV/12kA
Light Pollution Compliance
Photobiological Risk: EXEMPT GROUP
LED Source 100,000h L90B10 @700mA
GET IN TOUCH
For more information about our lighting solutions, please fill out the form.